Water Supply & Irrigation

[fibosearch]

Showing 49–64 of 64 results

  • SOG – TAPPING BRIDGE FOR METAL AND ASBESTOS-CEMENT PIPES

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • SQUARE MANHOLE COVER – NOT FIXED

    Features Material: Ductile iron GJS, bitumen coated Capacity: Class А15 – B 125 according to EN 124 Purpose: Access to valves, measuring instruments, etc. Usage: On sidewalks, pedestrian walks, bicycle walks, parks, as well as streets with light vehicles traffic Versions: Not fixed

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • STREET MANHOLE COVER, WITH OR WITHOUT OPENINGS

    Features Material: Ductile iron GJS, bitumen coated Capacity: Class C250; D 400, according to EN 124 Purpose: To close sewage shafts, with intensive and regular access, frequent openings Usage: For streets with high traffic intensity of regular and heavy vehicles, with normal speed Versions: Fixed with openings and without openings. With/without automatic closing

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • SWING CHECK VALVE

    Features • Rubber encapsulated disc. • Suitable for both horizontal and vertical installation. • Working Pressure: PN10, PN16. • Available range: DN 50-500. • Inside and outside epoxy coated min. 250μm.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • TAPERED RUBBER SEAL

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • TELESCOPIC EXTENSION SPINDLE

    Features: • Allows opening and closing valves • Easy to install without special tools • Protection against dirt • Adjustable in any position within the range, and self-holding • The protective tube, cap, and clutch between the telescopic parts are integrated into a stable assembly • With ranges from 0,7 to 2,5 m

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • TENSILE RESTRAINED COUPLING FOR PE AND PVC PIPE

    Features: Body and end ring are produced of ductile iron material ENGJS-500 (GGG 50) according to EN 1563:2011 standard Protection with epoxy coating or thermoplastic coating with black color confirmed with health inspection certificate PN16 working pressure. Equipped with steel zinc plated bolts, nuts and washers

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • TENSILE RESTRAINED FLANGE ADAPTOR FOR PE AND PVC PIPE

    Features: Body and end rings are produced from ductile iron material EN-GJS-500 (GGG 50) according to EN 1563:2011 standard Flange Adaptоrs are produced according to EN 14525:2004 Protection with epoxy coating or thermoplastic coating with black color confirmed with health inspection certificate PN10, PN16 working pressure. Equipped with steel zinc plated bolts,nuts and washers EPDM…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • TWO-PART TAPPING SADDLE FOR PE/PVC PIPES

    Features The installation on PE and PVC pipes For horizontal or vertical installation Operating pressure PN16 bar, hydraulically tested according to EN12266-1: 2012 Body made of ductile iron EN-GJS-500-7 according to EN 1563:2011 Surface protection with epoxy paint min 250μm or thermoplastic confirmed with a health inspection sertificate issued by an accredited laboratory EPDM rubber…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • UNDERGROUND HYDRANT

    Features

    • Vertical installation of water or fire installation.
    • Automatic discharge after use.
    • Epoxy coating min 250 μm.
    • Working pressure PN16.
    • Connecting flange according to EN 1092-2.
    • Connecting with claw according to DIN 3221-C.
    • Maximum temperature: 50°C
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • UNIVERSAL TAPPING BRIDGE

    Features The installation on cast-iron, ductile, steel and asbestos cement pipes For horizontal or vertical installation Operating pressure PN16 bar, hydraulically tested according to EN12266-1: 2012 Body made of ductile iron EN-GJS-500-7 according to EN 1563:2011 Surface protection with epoxy paint min 250μm or thermoplastic confirmed with a health inspection sertificate issued by an accredited…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • X – BLANK FLANGE

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • XR – TAPERS FLANGES

    Features: Pressure-reducing flange allows a substantial reduction of the nominal diameter and is very practical because of the short overall length Flange dimensions according to EN 1092-1:2007+A1:2013/AC:2014 Material: Steel S235JR Zinc-plated bolts according to DIN975 Working pressure: PN10 and PN16. Surface protection with epoxy paint min 250μm or thermoplastic confirmed with a health inspection certificate…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Y STRAINER

    Features Y- Pattern. Stainless Steel Screen. Working Pressure: PN10, PN16. Available range: DN 50-300. Inside and outside epoxy coated min. 250μm.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Т – ALL FLANGED TEE

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • ТТ – ALL FLANGED CROSS

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page