Water Supply & Irrigation

[fibosearch]

Showing 17–32 of 64 results

  • FLANGЕ ADAPTOR WITH RESTRAINTS AGAINST PULL-OUT

    Features: For installation on cast iron / ductile, steel, Asbestoscement, PE, and PVC pipes Produced according to EN 14525: 2004 The body, closing ring, and clamps are made of hot rolled structural steel ST235JR standard EN 10025 -2:2004/AC:2005 or ductile iron according to EN 1563:2011 Surface protection with epoxy paint min 250 μm according to…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • FLEXIBLE TELESCOPIC DISMANTLING JOINT

    Features Dimension Range: DN50 to DN300. Working Pressure: PN10, PN16 Pressure test according to EN 12266-1:2012 Flange Drilling: EN 1092-2:1997 оr EN 1092-1:2007+A1:2013

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • GK – FLAP VALVE

    Features • Material steel with minimum quality ST235JR • Pressure PN10 to PN40 • Nominal diameter DN50 to DN2000 • Surface corrosion protection with external and internal applied epoxy coating with a minimal thickness of 250μm according to EN 14901:2014

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HDPE ADAPTOR FLANGE PN10 and PN16

    Features Material: PE100 Outstanding flexibility. Safe and easy jointing by butt welding. High impact resistance at very low temperatures

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HDPE ELBOW

    • Features
      • Material: PE100
      • Outstanding flexibility.
      • Safe and easy jointing by butt welding.
      • High impact resistance at very low temperatures
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HDPE END CAP

    Features

    • Material: PE100
    • Outstanding flexibility.
    • Safe and easy jointing by butt welding.
    • High impact resistance at very low temperatures.
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HDPE REDUCER

    Features

    • Material: PE100
    • Outstanding flexibility.
    • Safe and easy jointing by butt welding.
    • High impact resistance at very low temperatures.
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HDPE TEE

    Features

      • Material: PE100
      • Outstanding flexibility.
      • Safe and easy jointing by butt welding.
      • High impact resistance at very low temperatures.
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • HDPE TEE REDUCER

    Features

      • Material: PE100
      • Outstanding flexibility.
      • Safe and easy jointing by butt welding.
      • High impact resistance at very low temperatures.
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • INDUSTRIAL WATER METER

    Features Woltmann detachable type. Dry-dial, magnetic drive. Selected high quality materials for steady and reliable characteristics, low head loss and long life span. Universal use within this range detachable, without removing the meter from the pipeline for a easy maintenance and replacement, good looking, etc.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • INLET STRAINER WITHOUT VALVE

    Features Features Body Ductile iron or steelbody. Working Pressure: PN10,PN16. Available range: DN 50-500. Inside and outside epoxy coated min. 250μm.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • INOX ABOVEGROUND HYDRANT

    Features

    • Vertical installation of water or fire installation.
    • Automatic discharge after use.
    • Epoxy coating min 250 μm.
    • Working pressure PN16.
    • Aluminum couplings
    • Aluminum couplings
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • LOOSE STEEL FLANGE FOR HDPE

    Features For polyethylene, stub ends. Material: Steel S235JR. Working Pressure: PN10,PN16, PN25 and PN40. Protection: Zinc-plated or epoxy coated.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • MANHOLE COVER – GRATE FOR HIGHWAY

    Features Material: Ductile iron GJS, bitumen coated Capacity: Class D 400, according to EN 124 Purpose: Water drain from highways and streets Usage: Streets with high and heavy vehicle traffic Versions: Fixed/Not fixed

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • MANHOLE COVER FOR WATERMETER

    Features Material: Ductile iron GJS, bitumen coated Capacity: Class A15, according EN 124 Purpose: Closure of shafts for water meters or house connections with waterline Usage: On sidewalks, pedestrian walks, bicycle paths, and parks Versions: Fixed

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • MAX COUPLING

    Features: Body and end ring are produced of ductile iron material ENGJS-500 (GGG 50) according to EN 1563:2011 standard Couplings are produced according to EN 14525:2004 Protection with epoxy coating or thermoplastic coating with black color confirmed with health inspection certificate PN10 – PN16 working pressure. Equipped with steel zinc coated bolts, nuts and washers…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page